SẢN PHẨM KHOA HỌC ĐÃ CÔNG BỐ

Phan To Anh Vu. Ground Improvement Using Soil-Cement Method: A Case Study with Laboratory Testing and In-Situ Verification for a Highway Project in Southern VietnamGeotechnical Engineering Journal of the SEAGS & AGSSEA, Vol. 47 No. 1 March 2016.

- Chien H. Thai, Vuong N.V. Do, H. Nguyen-Xuan. An improved Moving Kriging-based meshfree method for static, dynamic and buckling analyses of functionally graded isotropic and sandwich plates. Engineering Analysis with Boundary Elements, Vol 64, March 2016, pp 122-136.

- Darn-Horng Hsiao, Vu To-Anh Phan and Chi-Chang Huang. An experimental investigation on dynamic properties of various grouted sands.  Geomechenics & Engineering , Volume 10, Jan 2016, Pages 77-94.

- Chin-Hyung Lee, Kyong-Ho Chang, Vuong Nguyen Van Do, Finite element modeling of residual stress relaxation in steel butt welds under cyclic loading. Engineering Structures, Vol 103, Nov 2015, Pages 63-71.

- Darn-Horng Hsiao, Vu To-Anh Phan, Yi-Ting Hsieh, Hsin-Yi Huo. Engineering behavior and correlated parameters from obtained results of sand-silt mixtures. Soil Dynamics and Earthquake Engineering, Volume 77, October 2015, Pages 137-151.

- Thong M. Pham, Muhammad N.S. Hadi, Tung M. Tran. Maximum usable strain of FRP-confined concrete. Construction and Building Materials, Volume 83, 15 May 2015, Pages 119-127.

- Hsiao Darn-Horng, Phan-To Anh-Vu,Kung Gordon Tung-Chin and Liao Chieh-Jui. Investigation and assessment of a landslide case study in southwestern Taiwan. Disaster Advances, Vol. 8(4), April 2015, 

- Muhammad N. S. Hadi, Tung M. Tran. Seismic rehabilitation of reinforced concrete beam-column joints by bonding with concrete covers and wrapping with FRP composites. Material and Structures, January 2015.

- Hyun-Seop Shin, Ki-Tae Park, Chin-Hyung Lee, Kyong-Ho Chang, Vuong Nguyen Van Do. Low Temperature Impact Toughness of Structural Steel Welds with Different Welding Processes. KSCE Journal of Civil Engineering, January 2015.

- Chin-Hyung Lee, Vuong Nguyen Van Do, Kyong-Ho Chang. Analysis of uniaxial ratcheting behavior and cyclic mean stress relaxation of a duplex stainless steel. International Journal of Plasticity, Volumn 62, November 2014, Pages 17-33.

Vuong Nguyen Van Do, Chin-Hyung Lee, Kyong-Ho Chang. High cycle fatigue analysis in presence of residual stresses by using a continuum damage mechanics model. International Journal of Fatigue, Volumn 70, January 2015, Pages 51-62.

- Vuong Nguyen Van Do, Chin-Hyung Lee, Kyong-Ho Chang. A constitutive model for uniaxial/multiaxial ratcheting behavior of a duplex stainless steel. Material and Design, Volumn 65, January 2015, Pages 1161-1171.

- Muhammad N.S. Hadi, Tung Minh Tran. Retrofitting nonseismically detailed exterior beam–column joints using concrete covers together with CFRP jacket. Construction and Building Materials, Volume 63, 30 July 2014, Pages 161–173.

Darn H. Hsiao and Vu T.A. Phan. Effects of silt contents on the static and dynamic properties of sand-silt mixturesGeomechanics and Engineering, Vol.7, No.3, Sep 2014, pp.297-316

Son Tung Pham. Experimental investigation and modelling of carbonation process in cement materials. The Open Civil Engineering Journal, Volume 7,2013, ISSN 1814-1495, pp. 116-126. Indexed by : ISI, EI. http://dx.doi.org/10.2174/1874149520130815006

Son Tung Pham. Modifications on microporosity and physical properties of cement mortar caused by carbonation: comparison of experimental methods. Advances in Materials Science and Engineering Journal, volume 2013, ISSN 1687-8434,9 pages. Indexed by : ISI, SCI.

Son Tung Pham, William Prince. The carbonation of calcium-silicate-hydrate C,S-H in cement molar studied using thermal analysis and gas pycnometer: determination of the quantity of calcium carbonate produced and the increase in molar volume. Advanced Materials Research Journal, ISSN 1662- 8985, Vol. 931-932, 2014, pp.411-415. Indexed by : ISI, El.http:/idx.doi.org/10.4028.

- Yeong-Nain Sheen*, Li-Jeng Huang, Her-Yung Wang,Duc-Hien Le. Experimental study and strength formulation of soil-based controlled low-strength material containing stainless steel reducing slag. Construction and Building Materials, 2014; 54; 1-9. SCI/EI (IF=2.293).

- Yeong-Nain Sheen, Li-Jeng Huang,Duc-Hien Le*. Predicting strength development of RMSM using ultrasonic pulse velocity and artificial neural network. Computer and Concrete (2013); 12(6); 785-802. SCI/EI (IF=0.936).

- Yeong-Nain Sheen, Li-Hao Zhang,Duc-Hien Le*. Engineering properties of soil-based controlled low-strength materials as slag partially substitutes to Portland cement. Construction and Building Materials (2013); 48; 822-829. SCI/EI (IF=2.293)

- Yeong-Nain Sheen, Her-Yung Wang*, Yi-Ping Juang,Duc-Hien Le. Assessment on the engineering properties of ready-mixed concrete using recycled aggregates. Construction and Building Materials, 45, 298-305. SCI/EI (IF=2.293).

- Yeong-Nain Sheen, Li-Jeng Huang, and Duc-Hien Le. Engineering properties of controlled low-strength material made with residual soil and Class F fly ash. 2014 The 3rd International Conference on Advanced Materials Design and Mechanic (3rd ICAMDM2014). Singapore; 2014.

- Li-Jeng Huang, Yeong-Nain Sheen, and Duc-Hien Le. On the multiple linear regression and artificial neural networks for strength prediction of soil-based controlled low-strength material. 2014 The 3rd International Conference on Advanced Materials Design and Mechanic (3rd ICAMDM2014). Singapore; 2014.

Tran, T. M., Hadi, M. N. S. and Pham, T. M. (2014). A new empirical model for shear strength of reinforced concrete beam–column connections. Magazine of Concrete Research, 66 (10): 514-530. 

Tran, T. M., Matuszkiewicz, B. and Hadi, M. N. S. (2013). Response of Substandard Reinforcing Details T Connections Upgraded With Concrete Covers and CFRP. Proceedings of the 4th Asia-Pacific Conference on FRP in Structures (APFIS 2013), Melbourne, Australia, 11-13 December 2013, Riadh Al-Mahaidi, Scott T. Smith, Yu Bai and Xiao-Ling Zhao (eds.), paper no. 94.

 - N. Vu-Bac, H. Nguyen-Xuan, L. Chen, C. K. Lee, G. Zi, X. Zhuang, G.R. Liu and T. Rabczuk; A Phantom-Node Method With Edge-Based Strain Smoothing For Linear Elastic Fracture Mechanics; Journal of Applied Mathematics, Volume 2013 (2013), Article ID 978026.

N. Vu-Bac, T. Lahmer, H. Keitel, J. Zhao, X. Zhuang and T. Rabczuk; Stochastic predictions of bulk properties of amorphous polyethylene based on molecular dynamics simulations; Mechanics of Materials, 68 (2014), 70--84.

N. Vu-Bac, T. Lahmer, Y. Zhang, X. Zhuang and T. Rabczuk; Stochastic predictions of interfacialcharacteristic of polymeric nanocomposites (PNCs); Composites Part B: Engineering, In Press (2014).

link liên kết feed